1. The product should be added to the concrete during the mixing process together with the water.
2. When using this product for the first time, or when there are changes in cement and other admixtures, tests must be done to determine the optimal dosage.
3. This product is a polymer product with a high concentration. After standing for a long time, due to gravity, the density in the lower part may be higher and the density in the upper part may be lower, and there may appear a small amount of floc, colloidal suspended matter or solid precipitation. If the above situation occurs within shelf life, it will not affect the performance of the product, and it can be used after being stirred evenly.
4. Over time, the color may deepen, but the color change does not affect the use of the product.
5. Due to the high concentration of this product, the viscosity will be greater than 2000mPa·S in low temperature seasons. It is recommended to use a high viscosity liquid pump.
6. When the temperature is low, the release of this product is relatively slow. For best performance it is advisable to extend mixing time as appropriate.
7. When this product is used in combination with other additives, a compatibility test should be conducted. If other functional admixtures are prepared, the shelf life of the newly prepared admixture is not the same as that of this product. There is a possibility of deterioration after high temperature or exposure to sunlight. It is recommended to prepare for current use.
8. This product is non-toxic, but it is forbidden to eat. It should be kept out of the reach of children. If it gets into eyes or mouth, please rinse with water and seek medical help immediately.
Audited Supplier 
){kind=link}