GaoQiang PCE BT-302 WR50 is a comb-type Polycarboxylate Ether Polymer, with superior dispersing ability to cement, which can significantly enhance the workability of concrete mix.
GaoQiang PCE BT-302 WR50 is a base material for third-generation superplasticizer/concrete admixture.
The product features:
- High Water-Reducing ability
- High initial workability
- Regular retention workability
- Superior dispersing ability and generate extremely fluid concrete
- High compatibility with cement and mineral admixtures
- Preferable compatibility with materials- containing high content of powder or clay
- The good surface appearance of concrete
Advantages
- High workability without bleeding or division
- Maintaining optimal workability
- Cost-saving through enhancing performance
- Compatible with all PCE types
- High durability through increased strength
- High-strength concrete with low W/C
| Property |
Value |
Method |
| Appearance |
White to Light Yellow Liquid |
Visual |
| Concentration |
Min 50% |
160˚C for 20min |
| pH (undiluted) |
5-7 |
Stock solution |
| Specific Gravity |
1.085 - 1.12 |
Hydrometer, 25˚C |
| Viscosity |
450 - 1000 |
25˚C, No.3, 60rpm |
T
echnical Specs Sheet - GiangQiang BT-302 PCE WR50
- Raw material for PCE based concrete admixture
- High strength concrete
- Pre-cast concrete
- High fluidity concrete
- General strength concrete
- Concrete for high-rise building and complex structures
Recommended Usage:
It is recommended to be used in combination with High Range Water Reducing type PolyCarboxylate Ether such as TriStar PCE WR50 at a ratio of approx. 1:3. The Product has a recommended dosage range of 0.2-1.0 liters/100kgs of binders on a basis of undiluted solution. We recommend diluting it as per the application. Sodium gluconate is recommended to adjust the setting time if necessary. The optimum dosage of the Product may depend on the specific requirements of concrete properties and materials. It can be determined by trials using the materials and conditions.
Side effects of Overdosing:
Overdosing can cause the segregation of concrete materials and thus the strength of concrete may become severely lower than the target value.
Compatibility:
All our PCE product line is well compatible with each other. To achieve either higher water reduction or longer retention, proper blending with other types of PCE is recommended to achieve the demanding result. The product is compatible with LignoSulfonate-based plasticizers, but NOT compatible with SNF-based ones.
Storage & Handling
The Product should be stored at room temperature and should be avoided from direct sunlight. If stored in the original unopened container, it will have a shelf life of twelve (12) months. If the product is frozen, please agitate it slowly until it melts again.
Packing
Bulk (21,000Kgs/Flexi Tank) or 1,100 Kgs/IBC
Precautions
The Product contains no hazardous materials and is completely transport-class free. However, it is recommended to use standard handling procedures with the product. Wear gloves and eye protection and splashes the skin with soap and water at the end of shifts or during breaks. For more information, please refer to the Material Safety Data Sheet.
Audited Supplier 
){kind=link}